XTAR MP2S-K2

100-240VAC (World Voltage) / 12VDC / 5VDC input independent channel 2 cell lithium ion (LiIon) / lithium iron phosphate (LiFePO₄) battery charger.

This kit includes 2 x K2LFP123A LiFePO4 batteries (Important: see note below). 

The charger features: 

• Comes with SAA, MEPS approved 100-240VAC (world voltage) to 5VDC input power adaptor, 12VDC to 5VDC input cigarette light connection car plug and 5VDC input USB cable.
• Two cell charger for charging one or two 3.6V/3.7V lithium ion cells and 3.0V/3.2V lithium iron phosphate in sizes 16340, 15270, 18350.
• To view the complete range of torch and laser sight batteries we have available please click this link.
• 2 x screw in spacers (adaptors) supplied for charging shorter cells. Extra Screw in adaptors also available. See model MP/WP Spacer Connector.
• Manual switch to select appropriate voltage for charging either 3.6V/3.7V lithium ion cells or 3.0V/3.2V lithium iron phosphate cells. N.B. Switch must be in the correct position for the cell type to be charged. Failure to do so could lead to damage of the equipment & possible cell explosion.
• 0.4A charging current for charging single low capacity battery, 0.25A charging current for charging two batteries.
• 0V battery activation function.
• LED status indicators for each charging channel.
• Algorithm based CC/CV charging system with reverse polarity & short circuit protection.
  • Constant charge current: 
    • One slot - 400mA ±20mA
    • Two slots - 250mA ±20mA
  • Termination current: 40mA ±10%

Please Note: While the sleeves of the included K2LFP123A batteries label these as LiIon batteries, be aware that they are in fact Lithium Iron Phosphate (LiFePO4) batteries. To charge the included batteries, ensure the charger is set to 3.0V to prevent damage to the batteries from overcharging.