Victron Energy SmartSolar MPPT 150/100-MC4

Victron Energy SmartSolar MPPT 150/100-MC4

SmartSolar 12V/24V/36V/48V 100A Solar Charge Controller MPPT Type SCC115110311

This package comes supplied with:

  • 12V/24V/36V/48V 100A Solar Charge Controller

Related Products

SmartSolar MPPT 150/100 solar charge controller from Victron Energy with:
  • 12V/24V/36V/48V auto select battery voltage *Software tool required for 36V
  • 100A rated charge current
  • Maximum PV open circuit voltage - 150V absolute maximum coldest conditions
  • 1450W @ 12V, 2900W @ 24V, 5800W @ 48V maximum PV power
  • Automatic load disconnect
  • 99% peak efficiency
  • Reverse polarity (fuse) protection, PV reverse polarity protection, output short circuit protection, over temperature protection

 

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 99%.

Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary witch (see manual for details).

Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.

Internal temperature sensor
Compensates absorption and float charge voltage for temperature.

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

VE.Direct
For a wired data connection to a Color Control panel, Venus GX, PC or other devices

Remote on-off
To connect for example to a VE.BUS BMS.

Programmable relay
Can be programmed (a.o. with a smartphone) to trip on an alarm, or other events.

Optional: LCD display


Click Here to view the SmartSolar Pluggable Display

A pluggable LCD display for the SmartSolar Charge Controllers


Fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.


SHARE:
Selling Unit EACH
Model No SmartSolar MPPT 150/100-MC4
Brand Victron Energy brand logo
Original Brand Victron Energy SCC115110311
Description SmartSolar 12V/24V/36V/48V 100A Solar Charge Controller MPPT Type SCC115110311
Width 295mm
Height 246mm
Length / Breadth / Depth 103mm
Weight 4500g
Categories Solar Charge Controllers/Regulators
MPPT Type Solar Controllers
Mountable Chargers
Power Products & Accessories
DC Solar Conversion
SmartSolar Range
Data Sheet Datasheet PDF Thumbnail icon Datasheet PDF Thumbnail icon

Login to MI Link for pricing
Login for Pricing
MI Link is a dealer-only portal. If you are not a current MI account holder register for an account

Not appropriate for DIY

INSTALLATION TO AUSTRALIAN STANDARDS REQUIRED

Please Note: Under the Australian Standards, a Licenced Electrician must install any electrical equipment that normally operates at a voltage greater than extra low voltage (ELV), that is, 50V AC or 120V ripple free DC in an electrical installation or is classified as DVC-B or DVC-C.

Solar Controller Resources

PWM or MPPT?

Not sure what type of Solar Charge controller you need? Read more: Which solar charge controller: PWM or MPPT?

Victron Connect app compatible

VictronConnect Compatible

VictronConnect lets you get live status information and configure any Victron Energy products via either Bluetooth or direct cable connection. Connect to Bluetooth equipped products, or non-Bluetooth equipped products using VE.Direct Bluetooth Smart Dongle. Connect directly to equipment using the VE.Direct to USB Interface (USB Type-A) or VE.Direct to Type C Interface (USB Type-C) cables.

Find out more about VictronConnect here, or download the App via these links. Click here to download the VictronConnect Manual.

Apple App Store

Apple Mac store

Google Play Store

Windows Download

Back to the top of page MI Link Contact Us