Product Details

Model No
SHARE US:
Selling Unit EACH
Categories Lithium Iron Phosphate Battery Packs
24 Volt Series LiFePO4
MG LFP Series
Lithium Iron Phosphate Modules
Description 25.6V 280Ah 7168Wh Lithium Iron Phosphate (LiFePO4) Battery Module with RJ45 CANBus Connection & Metal Casing
Application Automotive/Marine/RV Auxilliary Battery Banks, Off-Grid & Self Consumption Solar, UPS, Peak Shaving
Chemistry Lithium Iron Phosphate (LiFePO4)
Voltage 25.6V
Watt Hour 7168Wh
Nominal Capacity 280Ah
Maximum Continuous
Discharge Current
560A
Brand
Termination M8 Stud (Max. 15Nm)
Size 8S1P
Width 193mm
Height 294mm
Length/Breadth/Depth 652mm
Weight 53000g
Comments

Important Information:

This MG Energy 25.6V LFP Battery can be connected in Unlimited Parallel configurations.

Up to Five (5) Batteries in series connection are allowed for this model.

External BMS

These batteries require the use of a MG Master LV Battery Management Controller.

Battery Management Controllers are available to suit this module in the following configurations:

1-2 in Series.

3-4 in Series.

5 in series.

Fuses:

300A fuse inside battery. Fuses can be replaced with dummy fuses for high power applications. The battery will require external fuses in these cases.

*See Product Manual or Datasheet for more information and full specifications.

Product supplied with:

RJ45 CANBus comms connection.

MG Energy Systems LFP Series - Next Generation LiFePo4 chemistry

25.5V 280Ah  7168Wh 8S1P LiFePO4 Battery Module

  • Lead-acid replacement
  • Extended cycle life
  • Compact design
  • Plug and Play
  • Easy installation
  • High charge and discharge rate
  • NMEA2000 compatible
 
Specifications:
  • Cycle life: >3500 cycles (80% DoD) @ 25Deg Celcius to EoL of 70% of initial capacity.
  • Continuous discharge current: 280A
  • Max. discharge current: 560A
  • End of discharge voltage: 21.6V
  • Charge voltage: 28.4V - 29.2V (28.4V recommended)
  • Max. cont. charge current: 280A
  • Operating Discharge temperature: -20°C to +55ºC
  • Operating Charge temperature: 0°C to +45ºC
  • Storage temperature: -20°C to +45ºC
  • Humidity (non-condensing): max. 95%
  • Protection class: IP40
  • Cooling: Air, Convection
  • BMS passive balancing with integrated slave BMS.
  • Maximum Series Connection up to five (5) batteries allowed.
  • Unlimited Parallel Connections Allowed
 
 
 
 

Applications:

The LFP series is designed for use in a large range of applications such as mobile, marine and off-grid. For example to power electric motors for hydraulic power packs or electric-hybrid propulsion systems.

Easy Installation:

Combining the LFP series batteries with the MG Master LV or MG Master HV creates a compact system with reduced wiring and external components. The MG Master LV combines battery monitoring and control, DC distribution, fuse box and shunt in one device which saves installation time and space.



Safety:

Each battery module comes with an integrated battery management system (BMS). This is an intelligent electronic module (slave BMS), that measures all cell voltages and temperatures to control balancing on both battery cell and module level. The battery modules communicate by a galvanic isolated CAN-Bus with the MG Master LV or HV (master BMS), which collects and monitors the status of all battery modules. If the measured values from a battery module exceed the limit, the MG Master will automatically take action to protect the connected battery modules.

Battery Management Controllers:

Protecting, monitoring and controlling a battery system is very important to create a safe, reliable and easy-to-use system. The MG Master LV or HV is the safety and control unit of the battery system. It protects the connected battery modules against over-charging, over-discharging, over-temperature, under-temperature and controls the balancing of the battery cells. Besides a safety funtion, the MG Master LV or HV monitors and tracks other important parameters to give insight in the battery status and energy consumption. MG's battery system CAN-bus protocol can be used to communicate with other equipment and multi functional display's (MFD's) by NMEA2000 and web interface. The MG Master LV and HV ensure an easy and proper installation. Thanks to the built-in safety components a reliable installation is guaranteed.



Energy Storage Systems:

System flexibility is one of the main key features of all MG products. Combining LFP series batteries together with one of the Master BMSs creates a powerful system for a complete range of applications. Redundant systems can be made by connecting multiple Master BMSs in parallel to increase system reliability and capacity.

Shipping restrictions

SHIPPING RESTRICTIONS APPLY

This lithium based product is classified as Class 9 DG (UN3480) where it contains more than 20Wh/cell or 100Wh/pack (Lithium Ion) and therefore cannot be sent by airfreight.

Transport via ROAD or SEA FREIGHT ONLY for this product.

Data Sheet


Customer Number:
Email:
Password: