MG Energy MGER024015

MG Energy MGER024015

25.2V 600Ah 15.12kWh E-Rack Series Master LiIon NMC Battery + Cables (No Energy Monitor)

 

Important Information:

This MG Energy Master 25.2V LiIon Battery system can be connected in unlimited Parallel configurations with the addition of the MG Energy 25.2V Slave modules.

A redundant option is available with the addition of an extra MG Energy Master 25.2V LiIon Battery.

Series connections are not allowed for this model.

 This MG battery system can be connected by CAN-bus to communicate with chargers, inverters and power management systems. The system integrates seamlessly with Victron Energy equipment. Integration with other equipment is also possible, for example with SMA.


Product supplied with RJ45 comms connection.

*See Product Manual or Datasheet for more information and full specifications.

MG Energy Systems E-Rack Series - Next Generation LiIon Battery Solutions

25.2V 600Ah 15.12kWh LiIon Battery Module (MASTER)

  •    Compact design
  •    Intergrated battery management system
  •    Easy installation
  •    Solar energy storage and peak-shaving
  •    Scalable and flexible in intergration
  •    Suitable for stationary and mobile applications
 

 Specifications:

  •     Cycle life: 3000 cycles (75% DoD) - Default mode
  •     Cycle life: 2000 cycles (95% DoD) - Performance mode
  •     Maximum discharge current: 900A (1.5 C)¹
  •     End of discharge voltage: 21.0V
  •     Charge voltage: 29.4V
  •     Maximum charge current: 600A (1.0 C)¹
  •     Operating Discharge temperature: -20°C to + 55ºC
  •     Operating Charge temperature: 0°C to + 45ºC
  •     Storage temperature: -20°C to + 45ºC
  •     Humidity (non-condensing): ≤ 95%
  •     Protection class: IP40
  •     Cooling: Air convection (no fans)
  •     BMS passive balancing with integrated slave and Master BMS

               ¹ Duration is depending on battery temperature
               
               

Flexibility and scalability:

System flexibility is one of the key features of MG E-Rack. The combination of the modular rack and the HE batteries creates a powerful system for a wide range of applications with system voltages of 25.2V up to 465V and capacities of 7.5kWh up to several MWh.

Redundancy:
 

Reliability of energy storage becomes more important as it is used in off-grid and backup power systems. E-racks can be set up to provide redundancy. In that case each E-Rack contains a master battery management system which is digitally combined to control chargers and inverters. Should one E-Rack fail, it goes to fail-safe and the system will keep operating with the other E-Racks.

Safety:

Each battery module comes with an integrated battery management system (BMS). This is an intelligent electronic module (slave BMS), that measures all cell voltages and temperatures to control balancing on both battery cell and module level. The battery modules communicate by a galvanic isolated CAN-Bus with the MG Master LV or HV (master BMS), which collects and monitors the status of all battery modules. If the measured values from a battery module exceed the limit, the MG Master will automatically take action to protect the connected battery modules.

 

Battery management controllers:

Protecting, monitoring and controlling a battery system is very important to create a safe, reliable and easy-to-use system. The MG Master LV or HV is the safety and control unit of the battery system. It protects the connected battery modules against over-charging, over-discharging, over-temperature, under-temperature and controls the balancing of the battery cells. Besides a safety funtion, the MG Master LV or HV monitors and tracks other important parameters to give insight in the battery status and energy consumption. MG's battery system CAN-bus protocol can be used to communicate with other equipment and multi functional display's (MFD's) by NMEA2000 and web interface. The MG Master LV and HV ensure an easy and proper installation. Thanks to the built-in safety components a reliable installation is guaranteed.
 
Remote and local monitoring:

The MG Energy monitor can optionally be added to the rack. This enables local and remote monitoring of the battery system. The integrated WiFi in the MG Energy monitor connects to the MG Energy Portal to view the status of the system and give insight in the energy flows.

SHARE:
Selling Unit EACH
Model No MGER024015
Brand MG Energy brand logo
Description 25.2V 600Ah 15.12kWh E-Rack Series Master LiIon NMC Battery + Cables (No Energy Monitor)
Application Automotive/Marine/RV Auxilliary Battery Banks, Off-Grid & Self Consumption Solar, UPS, Peak Shaving
Chemistry Lithium Ion (LiIon)
Voltage 25.2V
Watt Hour 15120Wh
Nominal Capacity 600Ah
Maximum Continuous Discharge Current 900A
Termination M8 Stud (Max .15Nm)
Size 1S2P
Width 500mm
Height 480mm
Length / Breadth / Depth 690mm
Weight 127000g
Categories Lithium Ion Batteries
Lithium Ion Battery Modules
Rack Mount Battery Systems
Rack Mount Batteries
MG Energy E-Rack Series LiIon
Data Sheet Datasheet PDF Thumbnail icon

Login to MI Link for pricing
Login for Pricing
MI Link is a dealer-only portal. If you are not a current MI account holder register for an account

Shipping restrictions Class 9 Dangerous Goods icon

SHIPPING RESTRICTIONS APPLY

Due to IATA and individual airline regulations, this item may only be shipped by surface (road/sea) freight.

UN3480 FULLY DECLARED CLASS 9 DANGEROUS GOODS LITHIUM ION BATTERIES - Contains cells/batteries packed in accordance with Packing Instruction P903 from ADG 7.7 & IMDG Code 2020. Surcharges will apply.

Further information on freight & postal regulations for lithium / lithium-based and other battery chemistries can be found on our battery transportation page.

Back to the top of page MI Link Contact Us