Product Details

Model No
SHARE US:
Selling Unit EACH
Categories Power Products & Accessories
Inverter Chargers
Inverter Chargers - RV/Marine Type
Multi & MultiPlus Inverter Chargers
Description MultiPlus Inverter & SLA/LiFePO4 Charger 48V 1600VA 20A 16A TRANSFER SWITCH PMP482160000
Application Automotive/Marine/RV, Auxilliary Battery Banks, Off-Grid & Self Consumption Solar, UPS, Peak Shaving
Original Brand Victron Energy PMP482160000
Voltage 48V
Brand
Width 265mm
Height 470mm
Length/Breadth/Depth 120mm
Weight 10200g
Comments

This package comes supplied with:

  • 48V 1600VA 20A Inverter Charger

Related Products

The new style MultiPlus is set to replace the earlier Multi & MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure

Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

PowerControl - Dealing with limited generator, shore side or grid power
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist - Boosting the capacity of shore or generator power  )
Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

High start - up power
Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.

Search Mode
When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.

Programmable relay

By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).

Data Sheet


Customer Number:
Email:
Password: