Product Details

Model No
SHARE US:
Selling Unit EACH
Categories Lithium Ion Batteries
Lithium Iron Phosphate Battery Packs
24 Volt Series LiFePO4
LiFeP04 Battery Solutions
Victron LFP-BMS Smart Lithium
Lithium Iron Phosphate Modules
Description Victron Energy BAT524120610 24V (25.6V) 200Ah SMART Lithium Iron Phosphate (LiFePO4) Rechargeable Lithium Battery
Original Brand Victron Energy BAT524120610
Chemistry Lithium Iron Phosphate (LiFePO4)
Voltage 25.6V
Watt Hour 5120Wh
Nominal Capacity 200Ah
Maximum Continuous
Discharge Current
400A
Brand
Width 650mm
Height 237mm
Length/Breadth/Depth 163mm
Weight 39000g
Comments

Important Information:

Victron Energy LFP batteries have integrated cell balancing and cell monitoring.

Up to five batteries can be paralleled and up to four batteries can be series connected, so that a 48V battery bank of up to 3000Ah can be assembled.

The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS) with two M8 circular connector cord sets.

The most Popular BMS is the VE Bus BMS This BMS can be used to control VE bus devices such as the Victron Inverter Charger range. 

If not connecting to a victron inverter charger use the smallBMS  

*See product manual for more information

High capacity 24V (25.6V) 200Ah Lithium Iron Phosphate (LiFePO4) battery module with built-in Bluetooth

Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.

Specifications:

  • Cycle life: 2500 cycles (80% DoD); 5000 cycles (50% DoD)
  • Charge:
    • Cut-off voltage: 28.8V
    • Max. charge current (2C): 400A
  • Discharge:
    • Cut-off voltage: 22.4V
    • Max. continuous discharge current: 400A
  • Recommended charge current: 100A (0.5C)
  • Recommended discharge current: 200A (1.0C)
  • Configuration:
    • Series: up to 2
    • Parallel: up to 5
  • Temperature:
    • Charge: 5°C to + 50ºC
    • Discharge: -20°C to + 50ºC
    • Storage: -45°C to + 70ºC

 

Consider implementing Victron Energy's range of Lithium Iron Phosphate modules in high energy demand applications:

  • More RUGGED compared to lead acid batteries. 

LiFePO4 batteries do not need to be fully charged all the time. A partial charge may even slightly improve service life. In addition, LiFePO4 batteries have a wider operating temperature range, excellent cycling performance, lower internal resistance and higher rate of efficiency than lead acid batteries.

Lead acid batteries will fail prematurely due to sulfation if the battery is rarely, or never at all, fully charged or if the battery is stored for long periods partially or fully discharged. 

  • Higher ENERGY EFFICIENCY than lead acid batteries.
Round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of LiFePO4 batteries is 92% compared to lead acid batteries at around 80%. In off-grid applications like solar and/or wind, better energy efficiency means less energy loss.

  • SMALLER and LIGHTER than lead acid batteries.
LiFePO4 batteries are up to 70% smaller and 70% lighter than equivalent lead acid batteries.

Shipping restrictionsClass 9 Dangerous Goods icon

SHIPPING RESTRICTIONS APPLY
Due to IATA and individual airline regulations, this item may only be shipped by surface (road/sea) freight.

UN3480 FULLY DECLARED CLASS 9 DANGEROUS GOODS LITHIUM ION BATTERIES - Contains cells/batteries packed in accordance with Packing Instruction P903 from ADG 7.7 & IMDG Code 2020. Surcharges will apply.

Further information on freight & postal regulations for lithium / lithium-based and other battery chemistries can be found on our battery transportation page.

Data Sheet


Customer Number:
Email:
Password: