Product Details

Model No
SHARE US:
Selling Unit EACH
Categories Solar Charge Controllers/Regulators
MPPT Type Solar Controllers
Mountable Chargers
Power Products & Accessories
DC Solar Conversion
SmartSolar Range
CEC Approved Victron Items
Description 12V/24V 100A MC4 CAN-bus Smart Solar Charge Controller MPPT Type SCC115110512
Original Brand Victron Energy SCC115110512
Voltage 12/24V
Brand
Size 100A
Width 295mm
Height 216mm
Length/Breadth/Depth 103mm
Weight 4500g
Comments

This package comes supplied with:

  • 12V/24V 100A MC4 Solar Charge Controller

Related Products

*Please note this model is for 12V and 24V use only

If you don't need the flexibility of a higher voltage capable solar controller, this model provides a more cost effective solution without sacrificing functionality.

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.

Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.

Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can

VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices

Remote on-off
To connect for example to a VE.BUS BMS.

Programmable relay
Can be programmed to trip on an alarm, or other events.

Optional: LCD display


Click Here to view the SmartSolar Pluggable Display

A pluggable LCD display for the SmartSolar Charge Controllers


Fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

INSTALLATION TO AUSTRALIAN STANDARDS REQUIRED

Please Note: Under the Australian Standards, a Licenced Electrician must install any electrical equipment that normally operates at a voltage greater than extra low voltage (ELV), that is, 50V AC or 120V ripple free DC in an electrical installation or is classified as DVC-B or DVC-C.


Not sure what type of Solar Charge controller you need?

Click the icon to read a helpful guide from Victron Energy called:

Which solar charge controller: PWM or MPPT?

       
   Click here to access Victron Energy's MPPT Sizing Calculator

VictronConnect Compatible:

VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built in, or are connected to a VE.Direct Bluetooth Smart Dongle, or a VE.Direct to USB Interface

Find out more about VictronConnect here, or download the App via these links. Click here to download the VictronConnect Manual

Click to Open Click to Open
Click to Open Click to Open

 



Customer Number:
Email:
Password: