Pylontech HV CABLE KIT

This HV Cable Kit is suitable for Pylontech High Voltage Modules:

• H48050 Module
• H48074 Module
• PowerCube-H1-48-384V
• PowerCube-H1-48/432V
• PowerCube-H1-48/480V
• PowerCube-H1-48/528V
• PowerCube-H1-48/576V
• PowerCube-X1-48/144V
• PowerCube-X1-48/192V
• PowerCube-X1-48/240V
• PowerCube-X1-48/288V
• PowerCube-X1-48/336V

The cable kit comes with:

• 1 x 2 Metre Orange 20mm copper core cable with Radlok(TM) to ring terminal termination
• 1 x 2 Metre Black 20mm copper core cable with Radlok(TM) to ring terminal termination
• 1 x 3 Metre RJ45 communication cable.

Cables have 120A current capacity.

NB. This cable set can be used with the standard UP & US series batteries if paired with Victron Inverters as the comms leads are not used. See Note Below.

*Please Note: to connect to a Victron Energy Inverter Charger via a GX device you require a compatible communicaition cable to enable DVCC (Distributed Voltage Current Control).

VE.Can to Pylontech 1.8M VE.Can to CAN-bus BMS Type B Cable 1.8m
For use with Pylontech: US2000, US3000, UP2500 Modules

VE.Can to CAN-bus BMS Type A Cable 1.8m VE.Can to CAN Bus cable (Type A) 1.8m
For use with Pylontech: US2000C, US3000C, US5000-B & Force L Series Modules

For US & UP Series Modules, use the UP/US Cable Kit