Lutron DW6195

3 phase power analyser with SD card real time data recorder with harmonic measurement.

Complete set with 4 x Test Leads, 4 x Alligator clips, 3 x Clamp Probes, AC to DC 9V adaptor, 2GB SD memory card and carry bag.

Features:

• Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W
• 3 current probes ( CP-1201 ) are included, if change the current probes, calibration procedures are not necessary.
• Current probe input signal/ranges with selection: 
  • Input signal (ACV): 200 mV/300 mV/500 mV/1 V/2 V/3 V.
  • Ranges (ACA): 20 A/200 A/2000 A/30 A/300 A/ 3000 A 60A/600A/6000A
• Measurement:
  • V (phase-to-phase), V (phase-to-ground)
  • A (phase-to-ground)
  • KW / KVA / KVAR / PF (phase)
  • KW / KVA / KVAR / PF (system)
  • KWH / KVAH / KVARH / PFH (system)
  • Phase angle
• Harmonics display (1-50th order).
• Simultaneous display of Harmonics and Waveform.
• Display of Waveform with Peak Values.
• Analysis of Total Harmonic Distortion ( THD ).
• Graphic Phase diagram with 3-Phase system parameters.
• 3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor.
• Capture Transient events (including Dip, Swell and Outage ) with programmable threshold ( % ).
• Programmable CT ratio ( 1 to 600 ) and PT ratio ( 1 to 1000 ).
• ACV input impedance is 10 Mega ohms.
• Safety Standard : IEC 1010, CAT III 600V.
• Built-in clock and Calendar, real time data record with SD memory card , sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the measured value with the time information ( year, month, data, hour, minute, second ) to the Excel directly, then user can make the further data analysis by themselves.
• Computer data output, can cooperate with optional USB Cable/USB-01, RS232 cable/UPCB-02 and Data Acquisition software, SW-811,SW-U811