West Mountain Radio PWRcheck Plus

PWRcheck+ is an integrated DC power analyser, watt meter and electricity monitor, measuring 0V to 60V DC at up to 40A.

The backlit graphics LCD features seven display modes including voltage, amperage, wattage, amp-hours and voltage quality. Alarms can be set to flash the display for programmable limits for over/under voltage and over current, wattage and amp-hours. High side monitoring simplifies installation making it suitable for vehicle use.

Source and load connections utilise 45A Powerpole® connectors. Non-volatile memory stores over 750000 sample points for data logging (Nearly 18 months worth of data @ 1 point per minute). Included PC software supports real-time monitoring, data download and charting. 

PWRcheck Plus enables amateur radio enthusiasts, emergency service providers and site operators to assess load requirements and monitor the status and health of their DC power supply systems. 

PWRCheck Plus Comes supplied with:

• PWRcheck Plus - integrated DC power analyser, watt meter and electricity monitor
• PWRcheck software, Version 1.52
• Micro USB cable
• 2 pair Red and Black Powerpole® with 30A contacts
• Owner's Manual

Hardware Features:

• Handles 8 display modes including voltage, current flow in either direction, wattage and amp-hours
• Measures 0V* to 60V (Less than 8V requires USB power to PWRcheck Plus), 40A continuous load
• Accurate to within +/- 10mV, +/- 10mA
• Resolution - 10mV, 10mA
• High side monitoring does not require breaking power supply ground or return path, ideal for vehicle use
• Vibrant LCD color touchscreen displays data in digital, analog and bar graph formats
• Monitor back up battery with programmable gas gauge
• Non-volatile memory stores more than 100,000 data points (nearly 2 1/2 months worth of data @ 1 point per minute) without power
• USB computer interface for configuration and data download
• Programmable alarm conditions for overcurrent, over/under voltage, amp-hours
• Uses Powerpole® connectors (see Accessories)

* PWRcheck Plus requires a minimum 50mA load to measure voltages below 4.5V.

Software Features:

• Easily program every aspect of PWRcheck+ operation such as data logging rate, display formats, alarm conditions
• Displays current, voltage, wattage and amp-hours in real time
• Integrated charting software automatically collects and displays data
• Downloads stored data for later analysis
• Exports to Excel

Computer System Basic Requirements

• At least an 800 X 600 graphics card and display monitor
• Windows XP, Vista®: 32 or 64 bit, Windows® 7: 32 or 64 bit, Windows® 8, Windows® 10
• An available USB port 

Software Screenshots

View Menu

Settings Menu