Discontinued product - Contact us for a possible replacement

Enecharger CHCR-AIR-10W

10W Enecharger Super Slim Wireless Charger Transmitter suitable for Qi enabled mobile phones and other devices

10W Super Slim Fast Charging Transmitter suitable for Qi enabled mobile phones and other devices.

Can wirelessly charge all Qi enabled phones. 10 watts is applicable to QC enabled fast charge phones whilst all other Qi enabled phones charge using 5W. The charger will auto detect this and charge accordingly.

CHCR-AIR-10W fast charge wireless desktop charger

Input voltage: 5V-1.5A/9V-1.67A
Output power & voltage: 5W 5V/1A, 10W-9V/1.2A
Radiated power: 10W
Transmission distance:8mm
Charge efficiency:≥60%
Execution standard: QI wireless charging standards
Supplied USB-Micro cable length: 1000mm

SHARE:

Selling Unit	EACH
Model No	CHCR-AIR-10W
Brand
Description	10W Enecharger Super Slim Wireless Charger Transmitter suitable for Qi enabled mobile phones and other devices
Application	Qi wireless charging enabled mobile phones and other devices
Termination	Qi wireless
Width	65mm
Height	6.9mm
Length / Breadth / Depth	126mm
Weight	51g
Categories	Phone-Game-GPS-PDA-Media Player-Tablet Chargers Phone Wireless Chargers (Qi) Qi Devices

Login to MI Link for pricing
Login for Pricing
MI Link is a dealer-only portal. If you are not a current MI account holder register for an account

What is Qi and how does it work??

Find out here.

Universal Compatibility

Universal Compatibility - Two fully automatic modes for wireless charging:-
(1) Fast Charge Mode 10W (5V-2A) ONLY available for Samsung Galaxy Note 8, S9, S8, S8+, S7, S7 Edge, S6 Edge Plus, Note 5 & other QC enabled devices (see notes below for QC charging).
(2) Standard Charge Mode 5W (5V-1A) for all other Qi enabled devices.

Please note Charging will always be slower no matter which type of charge mode is available when the charger is plugged directly into a standard USB1.0 or USB2.0 port found on most older computers.

For maximum 5W charging direct from a computer with a USB3.0 or later port must be used. (if the computer USB port has a blue coloured tongue it is a USB3.0 port).
For maximum 10W fast charging a minimum of 2A from a 5V USB power supply/charger is required. This is recommended but not required for Apple iPhone 8/8 Plus, iPhone X/X Plus as the charge rate accepted by these model iPhones is slower than the Samsung & other fast charge enabled phones.
For even faster charging of phones using Qualcomm Quick Charge (QC2, QC3 & soon QC4) for example Samsung Galaxy & Note models with in-built batteries use of a 10W or greater charger with Qualcomm Quick Charge 2.0, 3.0 or 4.0 technology is required.
For a list of enecharger Quick Charge enabled AC, DC & power-bank chargers: enecharger Quick Charge
For more information on Qualcomm Quick Charge please click this link: www.qualcomm.com/quickcharge
NOTE: Wireless charging uses the magnetic induction principle. This Qi charger comes built in with over-current, over-heat, over-voltage, and short circuit safeguards to ensure safe charging of your devices.
Allows up to maximum 8mm charging distance from the charging pad to the wireless charging side of the phone or other device so charging with even thick plastic or leather (NOT metal) protective cases is permissible. Please make sure to remove any metal material from the phone cases such as for magnetic mounts on your phone before charging. If you have metal materials with your phone, it will not allow Qi charging and will get hot within one minute or so, and could cause damage to the phone and/or charger.