Product Details

Model No
SHARE US:
Selling Unit EACH
Categories Lithium Ion Batteries
Lithium Ion Battery Modules
MG Energy HP Series LiIon
Description High Power 25.2V 135Ah 3402Wh HP Series LiIon NMC Battery + RJ45 Connector - Metal Enclosure
Application Automotive/Marine/RV Auxilliary Battery Banks, Off-Grid & Self Consumption Solar, UPS, Peak Shaving
Chemistry Lithium Ion (LiIon)
Voltage 25.2V
Watt Hour 3402Wh
Nominal Capacity 135Ah
Maximum Continuous
Discharge Current		 405A
Maximum Pulse
Discharge Current		 960000mA
Brand
Termination M8 Stud (Max. 15Nm)
Size 7S48P
Width 284mm
Height 193mm
Length/Breadth/Depth 362mm
Weight 22400g
Comments

 

Important Information:

This MG Energy 25.2V Lilon Battery can be connected up to 96 modules in Parallel configurations.

Up to Two(2) Batteries in series connection are allowed for this model.

More Series & Parallel available via application.

External BMS

Systems using up to Two (2) batteries in series require the use of a MG Master LV Battery Management Controller Click here to view suitable BMS's

Fuses:

200A fuse inside battery. Fuses can be replaced with dummy fuses for high power applications. The battery will require external fuses in these cases.

*See Product Manual or Datasheet for more information and full specifications.

Product supplied with:

RJ45 CANBus comms connection.

MG Energy Systems HP Series - Next Generation LiIon Battery Solutions

25.2V 135Ah 3402Wh High Power LiIon Battery Module

  • High power output
  • Intergrated battery management system
  • Scalable system design due to 25.2V modules
  • High safety standard
  • Plug and Play installation
  • Engine starting applications



 Specifications:

  • Cycle life: 500 cycles (80% DoD) @0.3C
  • Weight: 22.4Kg²
  • Maximum discharge current: 405A (3C)
  • End of discharge voltage: 21.0V
  • Recommended charge voltage: 28.0V
  • Maximum charge voltage: 29.4V
  • Maximum charge current: 189A (1.4C)
  • Operating Discharge temperature: -20°C to + 75ºC
  • Operating Charge temperature: 0°C to + 50ºC
  • Storage temperature: -20°C to + 20ºC (1 year)
  • Protection class: IP20
  • Cooling: Air, Active (2 fans inside)
  • BMS passive balancing with integrated slave BMS on both cell and module level
  • CAN-BUS communication (Galvanic Isolated) RJ45
  • Series configuration: Up to 2 units¹
  • Parallel configuration: Up to 96 units¹

 
         ¹ More series and parallel on request
         ² Including BMS and enclosure

Applications:

  • Marine: electric propulsion, Aux. battery bank
  • Industrial: Peak shaving, UPS systems
  • Off-grid/solar: Self-consumption, Off-grid solutions
  • Automotive: Mobile power sources, Electric mobility

 

High voltage systems:

The HP batteries are available in a high voltage version (HV). This makes it possible to connect these batteries in series up to 16 modules (465VDC). This configuration can be used in UPS systems, propulsion applications and solar energy storage.
 
M12 and RJ45
 

The communication connections between the batteries and Master unit can be established with either economical RJ45 cables or more robust M12 cables. Up to 96V both options are available. In the range higher than 96V only the M12 option is available.

 

Safety:

Each battery module comes with an integrated battery management system (BMS). This is an intelligent electronic module (slave BMS), that measures all cell voltages and temperatures to control balancing on both battery cell and module level. The battery modules communicate by a galvanic isolated CAN-Bus with the MG Master LV or HV (master BMS), which collects and monitors the status of all battery modules. If the measured values from a battery module exceed the limit, the MG Master will automatically take action to protect the connected battery modules.
Battery management controllers:

Protecting, monitoring and controlling a battery system is very important to create a safe, reliable and easy-to-use system. The MG Master LV or HV is the safety and control unit of the battery system. It protects the connected battery modules against over-charging, over-discharging, over-temperature, under-temperature and controls the balancing of the battery cells. Besides a safety funtion, the MG Master LV or HV monitors and tracks other important parameters to give insight in the battery status and energy consumption. MG's battery system CAN-bus protocol can be used to communicate with other equipment and multi functional display's (MFD's) by NMEA2000 and web interface. The MG Master LV and HV ensure an easy and proper installation. Thanks to the built-in safety components a reliable installation is guaranteed.
Energy Storage Systems:

System flexibility is one of the main key features of all MG products. Combining LFP series batteries together with one of the Master BMSs creates a powerful system for a complete range of applications. Redundant systems can be made by connecting multiple Master BMSs in parallel to increase system reliability and capacity.

Shipping restrictionsClass 9 Dangerous Goods icon

SHIPPING RESTRICTIONS APPLY
Due to IATA and individual airline regulations, this item may only be shipped by surface (road/sea) freight.

UN3480 FULLY DECLARED CLASS 9 DANGEROUS GOODS LITHIUM ION BATTERIES - Contains cells/batteries packed in accordance with Packing Instruction P903 from ADG 7.7 & IMDG Code 2020. Surcharges will apply.

Further information on freight & postal regulations for lithium / lithium-based and other battery chemistries can be found on our battery transportation page.

Data Sheet


Customer Number:
Email:
Password: