XTAR TZ55 Set T

The XTAR TZ55-T6 torch is fitted with the high output CREE XM-L T6 LED bulb producing an output of approximately 750 lumens provides ultra-bright, white, even light with no black spots.

Made from anodised 6061 aircraft grade aluminium alloy the XTAR TZ55 offers exceptional brightness for its size. The TZ55 is a two cell torch (4 cell when using CR123A batteries) so runtime has been increased over the more compact TZ20 torch.

Features

• Output 750 lumens, 9095 candela, Beam range 190 metres
• Run time 1 hour 40 minutes on high when using 2 x 2.6Ah lithium ion battery type. When battery voltage is detected at lower than 6.5V the torch will strobe 3 times as a low battery warning then reduce output to 95 lumens whilst still offering 130 minutes of further run time
• Toughened ultra-clear glass lens with anti-reflective coating
• Tactical style with belt clip
• Double springed to better handle weapon recoil
• Anti-roll, slip-resistant body design
• Tailcap switch with rapid response momentary on/off
• 215mm long x 40.5mm (Head diameter) and 25.5mm (Body diameter).
• Digitally regulated output - maintains constant brightness
• Waterproof to IPX8 Standard
• Powered by 2 x 18650/18700 lithium ion protected battery (included) or 4 x CR123A primary lithium batteries. Please note this model must be used at it's full length. It cannot be used as a cut down version with only one lithium ion battery.
• Weapons mount & advanced remote pressure switch II included
• This product is a complete set. It comes with WP2II two cell charger complete with SAA / MEPS Australian approved 100-240VAC (world voltage) AC adaptor & 12VDC car adaptor. Also included is two 2600mAh 18700 size XTAR protected batteries made with Sanyo cells, carry case, lanyard, extra switch, extra O-Ring

Accessories

• For extra batteries we recommend using our range of lithium ion protected batteries using the highest grade Japanese brand cells. For this model flashlight we offer rechargeable battery models TB-18650IC26 (Sanyo Li-Ion cell 2.6Ah) or the high capacity TB-18650IC31 (Panasonic LiIon cell 3.1Ah) or the ultra high capacity TB-18650IC34 (Panasonic LiIon cell 3.4Ah).
• For rechargeable battery charging options please view our range of XTAR chargers.
• For storing extra batteries we recommend the PBC4 battery case
• Keep the threads and 'O' ring seals used in LED torches in good condition by applying XTAR Silicone Grease Lubricant

Download A3 Selection Chart for the complete Xtar Torch Range