Victron Energy BlueSolar MPPT150/100-TR VE.Can

Victron Energy BlueSolar MPPT150/100-TR VE.Can

12V/24V/36V/48V 100A CAN-bus Blue Solar Charge Controller MPPT Type SCC115110420

BlueSolar Charge Controllers MPPT 150/100-Tr VE.Can

  • 12V/24/V/36V/48V auto select battery voltage *software tool required for 36V
  • 100A rated charge current
  • 1450W @12V, 2900W @24V, 5800W @48V nominal PV power
  • Automatic load disconnect
  • 98% peak efficiency
  • Reverse polarity (fuse) protection, output short circuit protection and over temperature protection

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 99%.

Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.

Internal temperature sensor
Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature (and current, in case of a BMV 712 or a SmartShunt) to one or more BlueSolar Charge Controllers. (VE.Direct Bluetooth Smart dongle needed)

VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can

VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices

Remote on-off
To connect for example to a VE.BUS BMS.

Programmable relay
Can be programmed to trip on an alarm, or other events.

Optional: LCD display

SmartSolar Pluggable LCD Display for the SmartSolar Charge Controllers

This package comes supplied with:

  • 12V/24V/36V/48V 100A Solar Charge Controller
  • Preset charge profiles for:
    • SLA
    • GEL
    • LITHIUM

Related Products


SHARE:
Selling Unit EACH
Model No BlueSolar MPPT150/100-TR VE.Can
Brand Victron Energy brand logo
Original Brand Victron Energy SCC115110420
Description 12V/24V/36V/48V 100A CAN-bus Blue Solar Charge Controller MPPT Type SCC115110420
Voltage 12/24/36/48V
Size 100A
Width 295mm
Height 216mm
Length / Breadth / Depth 103mm
Weight 4500g
Categories Solar Charge Controllers/Regulators
MPPT Type Solar Controllers
Mountable Chargers
Power Products & Accessories
DC Solar Conversion
BlueSolar Range
Data Sheet Datasheet PDF Thumbnail icon Datasheet PDF Thumbnail icon

Login to MI Link for pricing
Login for Pricing
MI Link is a dealer-only portal. If you are not a current MI account holder register for an account

Not appropriate for DIY

INSTALLATION TO AUSTRALIAN STANDARDS REQUIRED

Please Note: Under the Australian Standards, a Licenced Electrician must install any electrical equipment that normally operates at a voltage greater than extra low voltage (ELV), that is, 50V AC or 120V ripple free DC in an electrical installation or is classified as DVC-B or DVC-C.

MPPT Multi Chemistry Capable Icon

Multi Chemistry Profiles Installed

All Victron MPPT's come standard with charge profiles for multiple chemistries, including Lithium, Lead and GEL, as well as the ability to program user defined profiles.

The default setting for Victron Energy MPPT's is for Lead batteries, but charge profiles can be easily changed using the VictronConnect App. This BlueSolar MPPT will require a VE.Direct Bluetooth Smart Dongle, or a VE.Direct to USB Interface to access the VictronConnect App.

Solar Controller Resources

PWM or MPPT?

Not sure what type of Solar Charge controller you need? Read more: Which solar charge controller: PWM or MPPT?

Australian Made Product

The product has a rotary switch that can be used to select eight pre-programmed battery charge algorithms

The factory default setting is No.2 for AGM batteries. For most LiFePO4 batteries, No.7 is the preferred setting.

Turning the rotary switch will override the charge settings including settings that were made with the VictronConnect app or with the display. Likewise, if charge settings are changed with the Victron Connect app or the display, this will override the rotary switch setting.

Victron Connect app compatible

VictronConnect Compatible

VictronConnect lets you get live status information and configure any Victron Energy products via either Bluetooth or direct cable connection. Connect to Bluetooth equipped products, or non-Bluetooth equipped products using VE.Direct Bluetooth Smart Dongle. Connect directly to equipment using the VE.Direct to USB Interface (USB Type-A) or VE.Direct to Type C Interface (USB Type-C) cables.

Find out more about VictronConnect here, or download the App via these links. Click here to download the VictronConnect Manual.

Apple App Store

Apple Mac store

Google Play Store

Windows Download

Back to the top of page MI Link Contact Us